This document covers sound insulation requirements in dwelling-houses, flats, rooms for residential use and schools. These requirements not only cover party walls, but also internal walls and floors, and common areas within flats and rooms for residential uses.

Rooms for residential use inculdes, hostels, hotels, boarding houses, halls of residence and residential homes.

Approved Document E

2003 edition incorporating 2004, 2010, 2013 and 2015 amendments: Valid from 6 April 2015

PDF file: 3.83 MB, 86 pages

The requirements in this edition of Approved Document E are as follows:

E1 – Protection against sound from other parts of the building and adjoining buildings

Dwelling-houses, flats and rooms for residential purposes shall be designed and constructed in such a way that they provide reasonable resistance to sound from other parts of the same building and from adjoining buildings.

Limits on application

None

E2 – Protection against sound within a dwelling-house etc.

Dwelling-houses, flats and rooms for residential purposes shall be designed and constructed in such a way that – (a) internal walls between a bedroom or a room containing a water closet, and other rooms; and (b) internal floors, provide reasonable resistance to sound.

Limits on application

Requirement E2 does not apply to – (a) an internal wall which contains a door; (b) an internal wall which separates an en suite toilet from the associated bedroom; (c) existing walls and floors in a building which is subject to a material change of use.

E3 – Reverberation in th common internal parts of buildings containing flats or rooms for residential purposes

The common internal parts of buildings which contain flats or rooms for residential purposes shall be designed and constructed in such a way as to prevent more reverberation around the common parts than is reasonable.

Limits on application

Requirement E3 only applies to corridors, stairwells, hallways and entrance halls which give access to the flat or room for residential purposes.

E4 – Acoustic conditions in schools

(1) Each room or other space in a school building shall be designed and constructed in such a way that it has the acoustic conditions and the insulation against disturbance by noise appropriate to its intended use. (2) For the purposes of this Part – school has the same meaning as in section 4 of the Education Act 1996[1]; and school building means any building forming a school or part of a school.

Limits on application

None

Archived copies of Approved Document E

2013 Amendments to the Approved Documents

Valid from 6 April 2013 until 6 April 2015

PDF file: 478 KB, 54 pages

Approved Document E – 2003 edition incorporating 2004 and 2010 amendments

Valid from 1 October 2010 until 6 April 2013

The requirements in this edition were:
E1 – Protection against sound from other parts of the building and adjoining buildings
E2 – Protection against sound within a dwelling-house etc.
E3 – Reverberation in the common internal parts of buildings containing flats or rooms for residential purposes
E4 – Acoustic conditions in schools

PDF file: 4.69MB, 86 pages

Approved Document E – 2003 edition incorporating 2004 amendments

Valid from 1 July 2004 until 1 October 2010

The requirements in this edition were:
E1 – Protection against sound from other parts of the building and adjoining buildings
E2 – Protection against sound within a dwelling-house etc.
E3 – Reverberation in the common internal parts of buildings containing flats or rooms for residential purposes
E4 – Acoustic conditions in schools

PDF file: 5.76 MB, 84 pages

2004 Amendments to the Approved Document E

Valid from 1 July 2004 until 1 October 2010

PDF file: 303 KB, 10 pages

Approved Document E – 2003 edition

Valid from 1 July 2003 until 1 July 2004

The requirements in this edition were:
E1 – Protection against sound from other parts of the building and adjoining buildings
E2 – Protection against sound within a dwelling-house etc.
E3 – Reverberation in the common internal parts of buildings containing flats or rooms for residential purposes
E4 – Acoustic conditions in schools

PDF file: 3.31 MB, 77 pages

Approved Document E – 1992 edition

Valid from 1 June 1992 until 1 July 2003

The requirements in this edition were:
E1 – Airborne sound (walls)
E2 – Airborne sound (floors and stairs)
E3 – Impact sound (floors and stairs)

PDF file: 3.60 MB, 42 pages

Approved Document E – 1985 edition

Valid from 11 November 1985 until 1 June 1992

The requirements in this edition were:
E1/2/3 – Airborne and impact sound

PDF file: 2.57MB, 31 pages