This document covers the use of fuel and power in any new and existing buildings except dwellings. It explains the use of the Target CO2 Emission Rate (TER) and the Building CO2 Emission Rate (BER) which are calculated using the Simplified Building Energy Model (SBEM). This document also covers lighting, solar gain, heating controls and pressure testing.
The requirements in this edition of Approved Document L – Volume 2 are as follows:
L1 – Conservation of fuel and power
Reasonable provision shall be made for the conservation of fuel and power in buildings by—
(a) limiting heat gains and losses—
(i) through thermal elements and other parts of the building fabric; and
(ii) from pipes, ducts and vessels used for space heating, space cooling and hot water services;
(b) providing fixed building services which—
(i) are energy efficient to a reasonable standard;
(ii) have effective controls; and
(iii) are commissioned by testing and adjusting as necessary to ensure they use no more fuel and power than
Limits on application
None
L2 – On-site generation of electricity
Where a system for on-site electricity generation is installed—
(a) reasonable provision must be made to ensure that—
(i) the system and its electrical output are appropriately sized for the site and available infrastructure;
(ii) the system has effective controls; and
(b) it must be commissioned by testing and adjusting as necessary to ensure that it produces the maximum electricity that is reasonable in the circumstances.
Limits on application
None
Archived copies of Approved Document L – Dwellings

Approved Document L1A – 2013 edition incorporating 2016 amendments
Valid from 6 April 2016 until 15 June 2022
The requirement in this edition was:
L1A – Conservation of fuel and power in new dwellings
PDF file: 346 KB, 46 pages

Approved Document L – 1995 edition
Valid from 1 July 1995 until 1 April 2002
The requirement in this edition was:
L1 – Conservation of fuel and power
No download currently available

Approved Document L – 1990 edition
Valid from 1 April 1990 until ???
The requirement in this edition was:
L1 – Conservation of fuel and power
No download currently available

Approved Document L – 1985 edition
Valid from 11 November 1985 until 1 April 1990
The requirements in this edition were:
L2/3 – Resistance to the passage of heat
L4 – Heating system controls
L5 – Insulation of heating services
No download currently available














